Shop Drawing Services – MP Drafting & Design

Shop Drawing Services for Commercial Glazing Projects

MP Drafting provides precision planning through coordinated shop drawings that crews can install from and that hold up in review. We focus on reducing field questions, avoiding preventable rework, and keeping submittals moving. Planning is primary. Engineering remains structural validation when required, and we do not position drafting as a PE substitute.

Why It Matters

Shop drawings are not an afterthought.

Some teams assume engineering comes first and shops come later. In reality, shop drawings coordinate reality: layout clarity for installers, fastener intent tied to conditions, and reconciliation across inconsistent architectural information. Engineering validates structural performance. When both are needed, they align best when drafting is treated as a professional planning discipline, not a commodity.

Read "The Detailed Difference"

A practical explanation of what detail changes downstream.

Installer layout clarity

In/out dimensions and references that reduce field guesswork.

Fastener selection clarity

Conditions-driven intent surfaced early in the set.

Architectural inconsistency handling

Integrate conflicts and flag what needs clarification.

Inbound Requests

What customers ask for before they switch drafters or send overflow.

These are real inbound requests we see repeatedly. They are almost never asking for "pretty drawings." They are asking for certainty, speed where it matters, and a clean path to approval.

Request a Quote

Tell us your submittal date and what is driving it.

“I need a price for shop drawings and engineering for our project.”

“Let me know when these might be ready to submit for approval.”

“We would like to have the revisions by tomorrow.”

“Also, would this proposal include changes for the A/E redlines?”

“Once we have the first round of shop drawings, I will use those for field verification and then provide final dimensions.”

Start with the page that matches your glazing scope

If your regular drafting resource is overwhelmed or you need additional capacity on a complex job, pick the scope below and review the deliverable expectations. If you are not sure where your scope fits, use Request a Quote and attach a highlighted set or scope notes. MP's goal is to get you aligned early so the first job does not require babysitting.

Glazing Systems

Glazing Systems Curtain Wall Full unitized and stick-built curtain wall systems. Anchors, clips, joint details, and surrounding conditions coordinated to your architectural set.

Glazing Systems Storefront Commercial storefront systems including head, sill, jamb, and transom details. Coordinated with door frames, hardware, and thresholds.

Glazing Systems All-Glass Entrances & Partitions Frameless and semi-frameless all-glass systems. Patch fittings, spider brackets, structural silicone, and partition coordination.

Glazing Systems Handrail & Guardrail Glass and metal handrail and guardrail systems. Base plates, post spacing, cap rail details, and code-compliant configurations.

Glazing Systems Metal Panel & Cladding ACM and metal panel cladding systems. Panel layouts, reveal details, clip and fastener coordination, and transition to adjacent systems.

Glazing Systems Sunshades Horizontal and vertical sunshade systems. Arm attachments, blade spacing, structural coordination, and integration with curtain wall or storefront.

Specialized Services

Specialized Services Custom Fabrication Detailing One-off fabrication drawings for non-standard conditions, custom extrusions, and bespoke glazing assemblies requiring shop-level precision.

Specialized Services Advanced Detailing Drafting Live collaboration during the design phase. Drawings evolve with the project. Coordination with architect and engineer in real time.

Specialized Services BIM & 3D Services Revit and 3D modeling for glazing systems. Coordination with BIM project models, clash detection support, and LOD-compliant deliverables.

Specialized Services Engineering & Technical Support Simplified engineering coordination through a single channel. Structural validation aligned with your shop drawing package.

Specialized Services Level of Detail Options Quick Draw, Typical Detail, or Advanced Detailing. Choose the level that fits your project phase. Compare what is included in each.

Choose the level of detail that fits your phase

Not every project needs the same output on day one. MP uses three levels of detail to match project phase while protecting quality. This removes first-job price shock and makes it easier to start with the right deliverable, then escalate detail as the project hardens.

Feature	Quick Draw	Typical Detail	Advanced Detailing
Basic system details	✓	✓	✓
Generic conditions	✓	✕	✕
Faster lead times	✓	✕	✕
Accurate surrounding conditions	✕	✓	✓
Correct fasteners matched to condition	✕	✓	✓
Coordination dimensions & column line references	✕	✓	✓
Clear notes	✕	✓	✓
Design assist services	✕	✕	✓
3D isometrics or option detailing	✕	✕	✓
Studies for complex conditions	✕	✕	✓
Client standards or templates	✕	✕	✓
Engineering coordination available	✕	✕	✓

Engineering Coordination

Engineering validates. MP coordinates and integrates.

If delegated design, anchor review, or stamped calculations are required, engineering is the structural validation layer. MP's role is still planning and coordination: turning the architectural set and project conditions into a coherent drawing package that the field, fabricator, and reviewers can use. This separation is deliberate and respectful of existing engineering relationships.

Clear scope separation to prevent misalignment and rework later
Simplified coordination path when engineering is part of the deliverable

Engineering and Technical Support

Use when the project requires structural validation.

Drafting vs. Engineering

Drafting: Coordination, layout, surrounding conditions, and submittals.
Engineering: Structural validation, load calculations, and PE stamp when required.

Project Flow

Structured kickoff to reduce delays later.

The site strategy is built around one reality: "I need this done right and I don't have time to manage it." MP's process is designed to surface missing inputs early, keep communication clear, and deliver a reviewable set without chaos.

Our Process

See what we need in the first week and what you can expect.

Intake

Provide architectural drawings and scope information so MP quotes the right items.
Preview

Early review to identify missing info or issues that would hold production up.
Production

Drafting with questions handled as needed, then client review and revision cycle for submittal readiness.

Proof First

Proof first. Sample drawings build trust.

The fastest way to evaluate a new drafting partner is to review real sets. MP intentionally uses the Sample Drawings page as the quality checkpoint, because "show, not tell" removes hesitation faster than claims.

Typical detail examples that show surrounding conditions, fastener intent, and layout clarity
Architect-ready organization and presentation standards

View Sample Drawings Request a Quote

Tell us if the driver is approval date, lead-time, or field coordination.

FAQs

FAQs for the first job

These address the most common first-job concerns: timing, revisions, coordination, and engineering positioning.

Are you a low-cost drafting mill?

No. The tiered model exists to match project phase, not to reduce standards. Typical Detail is the brand standard and the most common selection for submittal-ready work.

Can you include A/E redline changes?

Yes. Clarify expectations up front so revisions are scoped correctly. Many customers explicitly ask whether proposals include “changes for the A/E redlines,” and we account for that during quoting and kickoff.

Do I need engineering before shop drawings?

Not as a rule. Engineering is structural validation. Shop drawings coordinate reality, integrate inconsistencies, clarify fasteners, and provide installer layout clarity. If engineering is required, it is coordinated without blurring responsibilities.

Do your shop drawings support field verification?

Yes. Customers regularly use first-round shops for field verification before final dimensions are locked. MP builds sets to support that workflow when the project requires it.

How do you handle revisions once drafting is underway?

You review the set and provide feedback, then MP revises to get the drawings ready for submittal. The goal is controlled revisions, not endless churn.

What do you need to quote accurately?

Architectural drawings plus scope information such as your quote scope or a highlighted set. Include any special requests for how details should be shown at the start so the first round aligns.

Who is involved on the MP side?

MP projects are supported by a coordinated team, with different people involved at key stages. Jessica assists with intake, quoting coordination, and job tracking. Andrew helps manage scheduling and operations as work moves through production. Jason may be involved when engineering coordination is required. Bob may also support customer communication as needed, while Marcus provides broader operational oversight and QA support. This structure helps keep projects organized, consistent, and clearly communicated from start to finish.

View Complete FAQs More questions answered clearly.